Corner Radius End Mills for Aluminium

AR corner radius end mills for aluminium combine a defined cutting diameter with a specified corner radius. Select the listed models against your part drawing and send your required quantities for quotation.

AR corner-radius configurations
Three-flute catalogue records
D and corner R specified independently
Aluminium feature and alloy review

Request a Model-by-Model Quote Compare Specifications ↓

AR corner radius end mills for aluminium: full-tool group view

AR corner radius end mills for aluminium: working-section detail

Specify the Aluminium Part’s Corner Transition

Match the AR corner radius to the part transition. Keep the edge radius distinct from the overall cutting diameter and from a full ball profile.

Match corner radius to the part transition.
Check cutting diameter against the feature width.
Compare flute length with the required engagement.
Provide alloy and holder details for application review.

Request a Model-by-Model Quote

Corner Radius End Mills for Aluminium — Product Views

AR Product Views

Full-tool profile view

AR corner radius end mills for aluminium: angled full-tool view — **Angled full-tool view**

Compare the Listed Series and Configurations

Series	Flutes	Model records
AR	3 FLUTES	20

Corner Radius End Mills for Aluminium Specifications

Review corner radius R, cutting diameter D and flute length Lc. Use each model row with its corresponding dimension drawing; preserve the defined symbols and units.

AR — 3 flutes

AR dimension drawing with original dimension symbols and figure references

Model	Cutting Diameter D (mm)	Corner Radius R (mm)	Flute Length Lc (mm)	Overall Length L (mm)	Shank Diameter d (mm)	Flutes
AR0102A	D1	R0.2	3	L50	4	3
AR0202A	D2	R0.2	6	L50	4	3
AR0305A	D3	R0.5	8	L50	4	3
AR0305	D3	R0.5	8	L50	6	3
AR0405A	D4	R0.5	10	L50	4	3
AR0405	D4	R0.5	10	L50	6	3
AR0605	D6	R0.5	16	L50	6	3
AR0610	D6	R1	16	L50	6	3
AR0805	D8	R0.5	20	L60	8	3
AR0810	D8	R1	20	L60	8	3
AR1005	D10	R0.5	25	L75	10	3
AR1010	D10	R1	25	L75	10	3
AR1205	D12	R0.5	30	L75	12	3
AR1210	D12	R1	30	L75	12	3
AR1605	D16	R0.5	40	L100	16	3
AR1610	D16	R1	40	L100	16	3
AR1630	D16	R3	40	L100	16	3
AR2005	D20	R0.5	45	L100	20	3
AR2010	D20	R1	45	L100	20	3
AR2030	D20	R3	45	L100	20	3

Match the Tool to the Feature and Machine Setup

Working Profile

Match the AR corner radius to the part transition. Keep the edge radius distinct from the overall cutting diameter and from a full ball profile.

Access and Holding Conditions

Identify alloy, machining operation and chip-removal conditions. A radius or flute-count match alone does not establish replacement suitability.

Workpiece and Cutting Conditions

Include the workpiece grade and condition, machining operation, machine and holder, tool projection and chip-removal arrangement. Coating and cutting-parameter requests need the actual application; a series name or tool colour does not establish suitability.

Prepare the Range for Your Machining Customers

Aluminium Corner Transitions

Provide the required corner radius and outer cutting diameter with the feature drawing. A tool that fits the opening can still leave the wrong corner profile if R is omitted from the enquiry.

Part-Family Purchasing

Keep each AR model and required radius identifiable when several aluminium parts share a diameter range. Include the alloy and operation instead of assuming one configuration suits every part in the family.

Ordering and Repeat Identification

Use the full model and quantity for every configuration. Add the part or tool drawing revision, acceptance requirements and any packing or label instructions so a repeat enquiry refers to the same item.

Production Equipment for Corner Radius End Mills for Aluminium

Review the equipment alongside the corner radius R, cutting diameter D and flute length Lc required for the selected model. Factory scenes provide context; the ordered geometry and any agreed treatment remain item-specific.

**CNC Tool Grinding Cell**
CNC tool grinding equipment on the workshop floor.
A tool drawing needs a clear definition of the working profile before a grinding setup is evaluated. For AR models such as AR0102A (3 flutes), review corner radius, cutting diameter and flute length. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

**CNC Grinding Equipment**
A row of enclosed CNC grinding machines.

**Tool Grinding Machine**
Enclosed tool-grinding equipment with an operator area alongside.
The relationship between the working edge and the holding section belongs in the dimensional review, not just the overall tool outline. Keep the drawing for AR0102A and other AR models attached to the order's corner radius, cutting diameter and flute length requirements. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

**Automated Tool Grinding Cell**
A tool-grinding machine with a robotic handling enclosure.
For a repeat-order programme, keep the approved model and drawing revision together; an automated handling scene does not establish a tolerance guarantee. In the AR range, use AR0102A as a model reference when checking corner radius, cutting diameter and flute length against the part requirement.

**Automated Grinding Equipment**
Tool-grinding machines with enclosed robotic handling equipment.

**CNC Grinding Machines**
Enclosed CNC grinding equipment arranged along the workshop aisle.
Compare the required cutting section and clearance envelope when reviewing production requirements; the workshop overview is context for that discussion. Select AR0102A or another AR model against the specified corner transition and milled feature.

**Cleaning Equipment**
A multi-tank cleaning line in the tool production workshop.
Surface cleanliness matters when reviewing a cutting edge or a proposed surface treatment. Specify the condition required for inspection rather than assuming one cleaning cycle suits every tool. Keep the drawing for AR0102A and other AR models attached to the order's corner radius, cutting diameter and flute length requirements. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

**Tool Finishing Workstations**
Machine workstations in the tool-finishing area.
The final working profile should be compared with the ordered geometry. Any finishing requirement needs to preserve the dimensions that define the selected tool. In the AR range, use AR0102A as a model reference when checking corner radius, cutting diameter and flute length against the part requirement.

**Cutting-Edge Preparation Equipment**
An operator beside a tool honing and polishing machine.
Edge preparation is a specification decision, not an automatic requirement. Discuss whether an edge treatment is appropriate for the selected geometry before adding it to an order. For AR models such as AR0102A (3 flutes), review corner radius, cutting diameter and flute length.

**Edge Honing and Polishing Equipment**
An operator beside enclosed tool honing equipment.
Where an edge treatment is requested, define the condition to be assessed without changing the intended cutting profile. This equipment view does not establish a treatment for every model. Select AR0102A or another AR model against the specified corner transition and milled feature. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

**Wet-Blasting Equipment**
Enclosed wet-blasting equipment in the surface-finishing area.
Wet blasting is shown as workshop equipment. Include it in a tool specification only when an applicable surface-treatment requirement has been agreed; it is not a default step for this range. Keep the drawing for AR0102A and other AR models attached to the order's corner radius, cutting diameter and flute length requirements.

**Wet-Blasting Equipment — Additional View**
An alternate image of enclosed wet-blasting equipment.
Use this additional equipment view as factory context. Whether a surface-treatment route is appropriate depends on the ordered tool and its acceptance requirements, not on the presence of a machine photograph. In the AR range, use AR0102A as a model reference when checking corner radius, cutting diameter and flute length against the part requirement. Preserve the specified corner radius, cutting diameter and flute length when discussing any optional treatment for AR.

**Tool Coating Equipment**
An enclosed tool-coating unit in the workshop.
Choose any coating against the workpiece and the selected tool geometry. Equipment photographs do not identify the coating chemistry or prove a hardness or tool-life rating. For AR models such as AR0102A (3 flutes), review corner radius, cutting diameter and flute length.

**Coating-Area Equipment**
Vacuum-chamber equipment in the coating area.
A surface-treatment enquiry should identify the selected model and required finish. Keep the coating requirement separate from dimensional acceptance and from unverified performance claims. Select AR0102A or another AR model against the specified corner transition and milled feature.

**Laser-Marking Station**
An operator working at an enclosed laser-marking station.
State the identification and label information required for the order. Any requested tool marking must be reviewed for the available non-cutting area rather than assumed suitable for every tool size. Keep the drawing for AR0102A and other AR models attached to the order's corner radius, cutting diameter and flute length requirements. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

Inspection Equipment and Acceptance Requirements

Build the inspection request around corner radius R, cutting diameter D and flute length Lc. Define the measurement features and limits for the selected drawing. Installed runout and balance are separate from a dimensional or visual check.

**Tool Inspection Room**
Operators working at optical inspection and tool-measuring stations.

Cutting-Tool Profile Measurement

An operator positioning a cutting tool at a profile-measuring station.

Profile review should follow the actual working geometry and the dimension definitions on its drawing. Define the feature being assessed before comparing measurements or accepting a sample. For AR models such as AR0102A (3 flutes), review corner radius, cutting diameter and flute length. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

**Measurement Workstations**
Optical measuring workstations in the inspection area.

**Tool Presetting and Dimensional Review**
A tool presetter with an optical measuring arm and display.
Tool presetting supports a discussion of length and visible profile. Assess installed runout separately with the agreed holder, projection, position and method; this image alone does not prove runout capability. Keep the drawing for AR0102A and other AR models attached to the order's corner radius, cutting diameter and flute length requirements. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

**Optical Tool Presetter**
An optical tool presetter and measurement display.
Agree the dimensional datum and measurement position before comparing presetting information. Overall length, cutting length and installed projection describe different aspects of a tool setup. In the AR range, use AR0102A as a model reference when checking corner radius, cutting diameter and flute length against the part requirement.

**Tool Measurement Setup**
An operator setting a tool in an enclosed measuring machine.
Identify the selected tool and the drawing features that need checking. Machine appearance alone cannot establish an inspection resolution, a tolerance limit or a completed result for that item. For AR models such as AR0102A (3 flutes), review corner radius, cutting diameter and flute length. State the aluminium alloy, operation and chip-removal conditions when reviewing this catalogue application group.

**Optical Inspection Workstations**
Operators inspecting tools at camera-based inspection workstations.
Define which cutting-edge and tip features need visual review and what constitutes an unacceptable defect. Use a suitable view of the working section rather than judging it from a full-tool photograph. Select AR0102A or another AR model against the specified corner transition and milled feature.

**Balancing Instrument**
A balancing instrument with a protective enclosure.
Balancing equipment is shown as factory context. Balance and runout are different assessments; do not treat this photograph as proof that an individual cutter has been balanced or that its cutting diameter is within tolerance. Keep the drawing for AR0102A and other AR models attached to the order's corner radius, cutting diameter and flute length requirements. For AR, any balance requirement needs its own assembly definition and acceptance basis.

Prepare a Clear Quote and Reorder List

Use one line for each series, model and quantity. For a trial order, describe the machining result you need to assess. For a repeat order, include the approved item or drawing revision so the enquiry identifies the same tool.

List the complete model code, quantity per model and any required dimensional tolerances.
Provide the workpiece, machining operation and machine or holder details for application review.
State individual tool protection, label information and outer-pack requirements in the enquiry.
Include the destination, required delivery date and any private-label or documentation requirements.

Corner Radius End Mills for Aluminium Purchasing FAQ

Is AR corner radius the same as a full ball radius?

No. Use the AR end-profile drawing to identify the corner transition. A ball nose tool has a different working profile; do not substitute one solely because its diameter or a radius value matches.

Which AR dimensions prevent a corner-profile mismatch?

Specify D and R independently, then Lc, d and L. Compare the part transition with the tool profile. The diameter alone does not determine the corner radius.

Can an AR cutter be approved using only the aluminium product label?

Provide the alloy, condition, machining task and required finish. The catalogue category is a selection starting point, not a universal application approval or a numerical performance guarantee.

Does the three-flute AR configuration guarantee better chip removal?

No universal result follows from flute count alone. Review the full geometry, engagement and chip-removal arrangement for the actual alloy and operation. Avoid treating one configuration field as a completed application test.

Can equal-diameter AR variants be combined into one reorder code?

Keep the full model, radius and length configuration identifiable. Match the approved item and drawing before grouping order lines; different corner radii must not disappear inside a diameter-only description.

What should I send for an AR corner-radius quote?

Provide the model or part drawing, required R and D, quantities, alloy and operation. Include length, holder and acceptance requirements, followed by marking, packing and delivery preferences.

Request a Quote for Corner Radius End Mills for Aluminium

Send the complete model list and quantities, or provide your tool and part drawings. Include the workpiece, operation, machine and holder, dimensional requirements and destination.

Explore the Carbide Cutting Tools Range →