Long Reach Ball Nose End Mills for Graphite

Select a GBM long-reach ball nose end mill for recessed graphite features by comparing the ball profile, cutting length and required access. Send the model and quantities with your part drawing for quotation.

GBM ball nose and long-reach configuration
Two-flute catalogue records
Ball radius, Lc and L1 compared separately
Graphite cavity and access review

Request a Model-by-Model Quote Compare Specifications ↓

GBM long reach ball nose end mills for graphite: full-tool group view

GBM long reach ball nose end mills for graphite: angled full-tool view

Reach the Graphite Cavity with the Required Ball Profile

Match the GBM rounded tip and reach to the graphite cavity. The tip radius and access behind the working section are separate selection requirements.

Match the ball radius to the cavity profile.
Compare flute length and effective length separately.
Check neck and holder clearance against the cavity section.
Include graphite grade and dust-control conditions in the enquiry.

Request a Model-by-Model Quote

Long Reach Ball Nose End Mills for Graphite — Product Views

GBM Product Views

GBM long reach ball nose end mills for graphite: alternate full-tool group view — **Alternate full-tool group view**

Single-tool profile view

Compare the Listed Series and Configurations

Series	Flutes	Model records
GBM	2 FLUTES	21

Long Reach Ball Nose End Mills for Graphite Specifications

Review ball radius R, flute length Lc and effective length L1. Use each model row with its corresponding dimension drawing; preserve the defined symbols and units.

GBM — 2 flutes

GBM dimension drawing with original dimension symbols and figure references

Model	Cutting Diameter D (mm)	Ball Radius R (mm)	Flute Length Lc (mm)	Effective Length L1 (mm)	Overall Length L (mm)	Shank Diameter d (mm)	Flutes
GBM0504A	D0.5	R0.25	1	4	L50	4	2
GBM0506A	D0.5	R0.25	1	6	L50	4	2
GBM0604A	D0.6	R0.3	1.2	4	L50	4	2
GBM0606A	D0.6	R0.3	1.2	6	L50	4	2
GBM0806A	D0.8	R0.4	1.6	6	L50	4	2
GBM0808A	D0.8	R0.4	1.6	8	L50	4	2
GBM1006A	D1	R0.5	3	6	L60	4	2
GBM1010A	D1	R0.5	3	10	L60	4	2
GBM1015A	D1	R0.5	3	15	L60	4	2
GBM1020A	D1	R0.5	3	20	L60	4	2
GBM1508A	D1.5	R0.75	3	8	L60	4	2
GBM1512A	D1.5	R0.75	3	12	L60	4	2
GBM1515A	D1.5	R0.75	3	15	L60	4	2
GBM1520A	D1.5	R0.75	3	20	L60	4	2
GBM2010A	D2	R1	4	10	L60	4	2
GBM2016A	D2	R1	4	16	L60	4	2
GBM2020A	D2	R1	4	20	L60	4	2
GBM3015	D3	R1.5	6	15	L75	6	2
GBM3030	D3	R1.5	6	30	L75	6	2
GBM4020	D4	R2	8	20	L75	6	2
GBM4030	D4	R2	8	30	L75	6	2

Match the Tool to the Feature and Machine Setup

Working Profile

Match the GBM rounded tip and reach to the graphite cavity. The tip radius and access behind the working section are separate selection requirements.

Access and Holding Conditions

Include graphite grade, required feature finish and the machine dust-control arrangement. Do not infer a diamond coating from the material category or tool colour.

Workpiece and Cutting Conditions

Include the workpiece grade and condition, machining operation, machine and holder, tool projection and chip-removal arrangement. Coating and cutting-parameter requests need the actual application; a series name or tool colour does not establish suitability.

Graphite Grade and Dust Control

Include the actual graphite grade and the machine dust-control arrangement in the application enquiry. Keep any coating requirement attached to the selected model; the catalogue material category does not identify a coating chemistry.

Prepare the Range for Your Machining Customers

Recessed Graphite Features

Send the graphite cavity section with the local ball radius and required depth. Check the larger body and holder approach after matching the working tip, particularly where walls restrict access.

Reach-Specific Graphite Reorders

Retain GBM model identity, Lc and L1 with the approved drawing. Include the grade and finish requirement so a repeat enquiry does not substitute a standard ball tool for a reach-specific configuration.

Ordering and Repeat Identification

Use the full model and quantity for every configuration. Add the part or tool drawing revision, acceptance requirements and any packing or label instructions so a repeat enquiry refers to the same item.

Production Equipment for Long Reach Ball Nose End Mills for Graphite

Review the equipment alongside the ball radius R, flute length Lc and effective length L1 required for the selected model. Factory scenes provide context; the ordered geometry and any agreed treatment remain item-specific.

**CNC Tool Grinding Cell**
CNC tool grinding equipment on the workshop floor.
A tool drawing needs a clear definition of the working profile before a grinding setup is evaluated. For GBM models such as GBM0504A (2 flutes), review ball radius, tip profile and cutting length. Keep effective reach and neck clearance separate from cutting length when checking access into the feature.

**CNC Grinding Equipment**
A row of enclosed CNC grinding machines.

**Tool Grinding Machine**
Enclosed tool-grinding equipment with an operator area alongside.
The relationship between the working edge and the holding section belongs in the dimensional review, not just the overall tool outline. Keep the drawing for GBM0504A and other GBM models attached to the order's ball radius, tip profile and cutting length requirements. Keep effective reach and neck clearance separate from cutting length when checking access into the feature.

**Automated Tool Grinding Cell**
A tool-grinding machine with a robotic handling enclosure.
For a repeat-order programme, keep the approved model and drawing revision together; an automated handling scene does not establish a tolerance guarantee. In the GBM range, use GBM0504A as a model reference when checking ball radius, tip profile and cutting length against the part requirement.

**Automated Grinding Equipment**
Tool-grinding machines with enclosed robotic handling equipment.

**CNC Grinding Machines**
Enclosed CNC grinding equipment arranged along the workshop aisle.
Compare the required cutting section and clearance envelope when reviewing production requirements; the workshop overview is context for that discussion. Select GBM0504A or another GBM model against the curved surface or local cavity feature.

**Cleaning Equipment**
A multi-tank cleaning line in the tool production workshop.
Surface cleanliness matters when reviewing a cutting edge or a proposed surface treatment. Specify the condition required for inspection rather than assuming one cleaning cycle suits every tool. Keep the drawing for GBM0504A and other GBM models attached to the order's ball radius, tip profile and cutting length requirements. Keep effective reach and neck clearance separate from cutting length when checking access into the feature.

**Tool Finishing Workstations**
Machine workstations in the tool-finishing area.
The final working profile should be compared with the ordered geometry. Any finishing requirement needs to preserve the dimensions that define the selected tool. In the GBM range, use GBM0504A as a model reference when checking ball radius, tip profile and cutting length against the part requirement.

**Cutting-Edge Preparation Equipment**
An operator beside a tool honing and polishing machine.
Edge preparation is a specification decision, not an automatic requirement. Discuss whether an edge treatment is appropriate for the selected geometry before adding it to an order. For GBM models such as GBM0504A (2 flutes), review ball radius, tip profile and cutting length.

**Edge Honing and Polishing Equipment**
An operator beside enclosed tool honing equipment.
Where an edge treatment is requested, define the condition to be assessed without changing the intended cutting profile. This equipment view does not establish a treatment for every model. Select GBM0504A or another GBM model against the curved surface or local cavity feature. Include the graphite grade, dust-control arrangement and required feature finish in the application review.

**Wet-Blasting Equipment**
Enclosed wet-blasting equipment in the surface-finishing area.
Wet blasting is shown as workshop equipment. Include it in a tool specification only when an applicable surface-treatment requirement has been agreed; it is not a default step for this range. Keep the drawing for GBM0504A and other GBM models attached to the order's ball radius, tip profile and cutting length requirements.

**Wet-Blasting Equipment — Additional View**
An alternate image of enclosed wet-blasting equipment.
Use this additional equipment view as factory context. Whether a surface-treatment route is appropriate depends on the ordered tool and its acceptance requirements, not on the presence of a machine photograph. In the GBM range, use GBM0504A as a model reference when checking ball radius, tip profile and cutting length against the part requirement. Preserve the specified ball radius, tip profile and cutting length when discussing any optional treatment for GBM.

**Tool Coating Equipment**
An enclosed tool-coating unit in the workshop.
Choose any coating against the workpiece and the selected tool geometry. Equipment photographs do not identify the coating chemistry or prove a hardness or tool-life rating. For GBM models such as GBM0504A (2 flutes), review ball radius, tip profile and cutting length.

**Coating-Area Equipment**
Vacuum-chamber equipment in the coating area.
A surface-treatment enquiry should identify the selected model and required finish. Keep the coating requirement separate from dimensional acceptance and from unverified performance claims. Select GBM0504A or another GBM model against the curved surface or local cavity feature.

**Laser-Marking Station**
An operator working at an enclosed laser-marking station.
State the identification and label information required for the order. Any requested tool marking must be reviewed for the available non-cutting area rather than assumed suitable for every tool size. Keep the drawing for GBM0504A and other GBM models attached to the order's ball radius, tip profile and cutting length requirements. Keep effective reach and neck clearance separate from cutting length when checking access into the feature.

Inspection Equipment and Acceptance Requirements

Build the inspection request around ball radius R, flute length Lc and effective length L1. Define the measurement features and limits for the selected drawing. Installed runout and balance are separate from a dimensional or visual check.

**Tool Inspection Room**
Operators working at optical inspection and tool-measuring stations.

Cutting-Tool Profile Measurement

An operator positioning a cutting tool at a profile-measuring station.

Profile review should follow the actual working geometry and the dimension definitions on its drawing. Define the feature being assessed before comparing measurements or accepting a sample. For GBM models such as GBM0504A (2 flutes), review ball radius, tip profile and cutting length. Include the graphite grade, dust-control arrangement and required feature finish in the application review.

**Measurement Workstations**
Optical measuring workstations in the inspection area.

**Tool Presetting and Dimensional Review**
A tool presetter with an optical measuring arm and display.
Tool presetting supports a discussion of length and visible profile. Assess installed runout separately with the agreed holder, projection, position and method; this image alone does not prove runout capability. Keep the drawing for GBM0504A and other GBM models attached to the order's ball radius, tip profile and cutting length requirements. Keep effective reach and neck clearance separate from cutting length when checking access into the feature.

**Optical Tool Presetter**
An optical tool presetter and measurement display.
Agree the dimensional datum and measurement position before comparing presetting information. Overall length, cutting length and installed projection describe different aspects of a tool setup. In the GBM range, use GBM0504A as a model reference when checking ball radius, tip profile and cutting length against the part requirement.

**Tool Measurement Setup**
An operator setting a tool in an enclosed measuring machine.
Identify the selected tool and the drawing features that need checking. Machine appearance alone cannot establish an inspection resolution, a tolerance limit or a completed result for that item. For GBM models such as GBM0504A (2 flutes), review ball radius, tip profile and cutting length. Keep effective reach and neck clearance separate from cutting length when checking access into the feature.

**Optical Inspection Workstations**
Operators inspecting tools at camera-based inspection workstations.
Define which cutting-edge and tip features need visual review and what constitutes an unacceptable defect. Use a suitable view of the working section rather than judging it from a full-tool photograph. Select GBM0504A or another GBM model against the curved surface or local cavity feature.

**Balancing Instrument**
A balancing instrument with a protective enclosure.
Balancing equipment is shown as factory context. Balance and runout are different assessments; do not treat this photograph as proof that an individual cutter has been balanced or that its cutting diameter is within tolerance. Keep the drawing for GBM0504A and other GBM models attached to the order's ball radius, tip profile and cutting length requirements. For GBM, any balance requirement needs its own assembly definition and acceptance basis.

Prepare a Clear Quote and Reorder List

Use one line for each series, model and quantity. For a trial order, describe the machining result you need to assess. For a repeat order, include the approved item or drawing revision so the enquiry identifies the same tool.

List the complete model code, quantity per model and any required dimensional tolerances.
Provide the workpiece, machining operation and machine or holder details for application review.
State individual tool protection, label information and outer-pack requirements in the enquiry.
Include the destination, required delivery date and any private-label or documentation requirements.

Long Reach Ball Nose End Mills for Graphite Purchasing FAQ

Which GBM dimensions determine access to a recessed graphite feature?

Compare R and D for the working surface, then Lc, L1 and the larger body clearance. Include the holder and cavity section. A matching ball radius alone does not establish sufficient access.

Can a standard graphite ball nose tool replace GBM?

Only after comparing the effective reach, flute length and clearance envelope. A rounded profile describes the tip, not the access behind it. Retain the actual model and part section in the comparison.

Does the GBM graphite label prove a diamond coating?

No. The application category and a photograph do not establish coating chemistry. State any treatment requirement with the chosen model and use the agreed item specification as the evidence.

What graphite information is needed for a GBM application review?

Include grade, feature geometry, required finish, operation and the machine dust-control arrangement. Record engagement and setup conditions where technical review is requested. Do not derive universal cutting settings from the material title.

Can the relieved GBM section be treated as extra cutting length?

Keep Lc and L1 separate. The clearance behind the cutting section does not automatically provide additional cutting edge. Review engagement and the cavity section against the actual model drawing.

What should a GBM purchasing trial evaluate?

Agree the cavity dimensions and surface requirement with the selected model. Record projection, holder, path and dust-control conditions. Keep those conditions and the approved drawing with any repeat-order reference.

Request a Quote for Long Reach Ball Nose End Mills for Graphite

Send the complete model list and quantities, or provide your tool and part drawings. Include the workpiece, operation, machine and holder, dimensional requirements and destination.

Explore the Carbide Cutting Tools Range →