A magnetic base is only one part of the holding system and must not replace a site risk assessment.
Use the comparison as a controlled buying record. It should identify the application, the exact tool variants, the evidence reviewed and every field still requiring supplier confirmation.
Start with the hole and assembly requirement
Identify hazards created by height, orientation, access and nearby work.
Identify hazards created by height, orientation, access and nearby work.
Compare cutting structure and operating behavior
Inspect cutter, pilot and holder before installing the tool.
Inspect cutter, pilot and holder before installing the tool.
Confirm machine, interface and workholding
Clean and assess the full magnetic contact surface.
Clean and assess the full magnetic contact surface.
Specify dimensions and controlled product fields
Fit the specified chain or strap so it can retain the machine if primary holding is lost.
| Requirement | Tool A | Tool B |
|---|---|---|
| Application | Confirm | Confirm |
| Machine/interface | Record | Record |
| Dimensions/depth | Approve | Approve |
| Sample/revision | Trace | Trace |
Evaluate samples with a stated method
Complete the pre-use control, cable, guard and coolant checks.
Complete the pre-use control, cable, guard and coolant checks.
Build a clear distributor assortment
Train operators on start sequence, feed, stopping and prohibited adjustments.
Train operators on start sequence, feed, stopping and prohibited adjustments.
Release quotations and repeat orders
Record inspection, incidents and replacement of damaged safety components.
Record inspection, incidents and replacement of damaged safety components.
Magnetic Drills·Safety Accessories·Applications·Request Setup Review
Frequently Asked Questions
Is magnetic force alone enough?
No. Contact condition and required secondary retention must be addressed.
Why use a safety chain?
It provides backup retention; it does not improve poor magnetic contact.
Can the machine run overhead?
Only when the exact model, setup and site procedure permit it.
When can chips be cleared?
Only after stopping and isolating the machine according to the instructions.
Does paint affect holding?
Coatings and contamination can reduce effective contact and require assessment.
Which PPE is required?
Follow the machine manual and site-specific risk assessment.
Conclusion
Safe magnetic drilling combines suitable contact, backup retention, compatible tooling, inspected controls and a position-specific work method.